Worbla´s Finest Art modeling material sheet, 1,0 x 250 x 375 mm
Although originally developed as a thermoplastic and mouldable material for industrial shoe making (Rhenoflex RX 5050), the Worbla´s Finest Art modeling material has found its way into other uses like making masks, faces, blades, replicas of equipment or gemstones, ornaments, decorations, jewellery and other similar objects.
For these uses, the material must be heated (about 2 to 3 minutes at 90 – 100 °C by means of a hair dryer, steam, hot water or a microwave oven). The material then becomes very pliable for about 5 to 8 minutes working time during which it can be bent and shaped before it cools and becomes once again stiff (if necessary, very sensitive moulded shapes should be covered with a moist cloth for protection). This process can be repeated any number of times, which means that making corrections in your work is always possible. Even leftover scraps can be reconditioned by heating them and kneading them (rolling pin!) so that they can serve as a modeling compound on their own – this means, of course, that there is no wastage. The adhesive that has been applied to one of the sides (which is also activated by heating and should therefore always be positioned on the exterior of the modeled object) makes it possible for the “artist” to increase the thickness of a layer or to attach small items or parts – this does not normally require any additional adhesive!